EMPIRICAL LABS DerrEsser ELDS-V 500-Series Dynamic High-Frequency Fixer (Vertical Version)

  • High-Performance Desser
  • High-Frequency Limiting
  • Hard-Clip Indiator
  • True Bypass
  • Military-Grade Switches and Relays
  • Hand-Built and Calibrated in the USA

The DerrEsser ELDS-V from Empirical Labs is a vertical multi-function dynamic filtering device, designed for API 500-Series enclosures. In its basic DS mode, it is an effective, level-insensitive de-esser, a device that will adjust the high-frequency gain on overly treble-y or spiky vocals or other sources in an extremely musical manner. However, unlike other de-essers, the device allows for multiple uses of its circuitry. As a de-esser in the DS mode (HF Limit OFF), the threshold can be set to tame harsh S's (sibilants) that result from an overly bright singer or from EQ'ing to make a vocal sound aggressive and clear. The DS threshold is not level dependant, and compares the amount of high-frequency content to the low-frequency content, so adjusting the overall level does not affect the threshold. It features VCA technology for glitch-free, distortion-free, and noise-free performance. The corner frequency is user adjustable with a high-performance active crossover.

In HF Limit mode, the DerrEsser essentially acts as a high-frequency compressor. If there is enough high-frequency content to exceed the threshold, then gain reduction occurs. It is level sensitive, but responds much more to high frequencies. This mode is more of a general high-frequency smoothing device. In high-pass mode and while using the LISTEN function, the user can employ the filter circuitry inside the DerrEsser to process their audio. With the LISTEN button in, and the HP/LP switch out, the user will be hearing the high frequencies that are being controlled with the dynamic/compression circuits. The corner frequency is adjustable with the frequency knob. In low-pass mode and with the LISTEN button in, and the HP/LP button in, the user is now listening to the low frequencies, those not affected by the VCA and dynamic/compression circuits. This is a 12 dB-per-octave filter whose corner frequency can again be adjusted with the frequency knob.

  • High-frequency limiting with a tailored soft knee. The Dynamic Section can be used for de-essing or smooth high-frequency softening
  • Hard-Clip Indicator Light: This Bad-Clip LED indicates when the sound level is within 1 dB of hard clipping and monitors several sections within the DerrEsser for possible clipping
  • Unity Gain: 6 dB of gain on inputs and outputs available
  • API-500 Series rack compatible
  • True bypass
  • Military-grade switches and relays

UPC: 855013006064
In the Box
EMPIRICAL LABS DerrEsser ELDS-V 500-Series Dynamic High-Frequency Fixer (Vertical Version)
  • Limited 3-Year Warranty
Frequency Response 3 Hz to 120 kHz (-3 dB points)
Dynamic Range -115 dB from maximum output (0.5% THD soft clipping) to minimum output, noise floor typically -93 dBu
Distortion Range 0.0035 and .01%
Outputs DC coupled
Input Impedance 20 kohms
Output Impedance 51 ohms
Attack Time < 1 ms
Release Time 0.04 seconds, fixed internally
Power Consumption Typical: 4 W
Maximum: 8 W
Packaging Info
Package Weight 0.85 lb
Box Dimensions (LxWxH) 10.3 x 7.0 x 3.0"
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.
Select Size *

Similar products