Menu

Home
Account
Privacy Policy
Refund Policy
Terms & Conditions
Change store language

Foama Studio Case for ARRI ALEXA 35 Lightweight Setup (Black Insert)

Rs147,105
Consumer Electronics Bhpv

Foama Studio Case for ARRI ALEXA 35 Lightweight Setup (Black Insert)

Product details

Foama 440BK0960BK Overview

Whether you are an owner-operator who needs a case for your ARRI ALEXA 35 Camera or a rental house looking to protect its investment, this black Studio Case for ARRI ALEXA 35 Lightweight Setup with a black insert from Foama has you covered. Nestled inside a Nanuk 960 case, the durable EVA foam is custom-cut to accommodate your camera and specific accessories.

The foam insert is custom-made to fit each piece of equipment perfectly, so you can rest assured knowing it's safe from any damage. While most foam inserts on the market are made from open-cell PE or PU foams that are less protective and not as durable, the Foama insert is designed using the highest quality closed-cell EVA foam, which is much stronger and more long-lasting than any other type on the market.

Insert Accommodates
  • ARRI ALEXA 35 lightweight cage
  • ARRI Bridge Plate Adapter BPA-6
  • Two 18" rods
  • Two accessory pockets
  • Memory cards
  • Card reader
Case Details
Made of high-strength NK-7 polypropylene copolymer resin, the case is vibration and impact resistant. It has low-profile wheels and a two-stage telescoping handle so you can pull the case behind you. If you need more freedom of movement, there are three comfortable soft-grip handles on three sides for hand-carrying. Additional design features include gasket sealing that brings the case to an IP67-rating to be dust and waterproof, a molded-in hinge for added strength, stainless 0.34" diameter steel reinforced padlock holes, and four PowerClaw trigger release latches that compress the O-ring and seal the case tight. A built-in automatic pressure release valve equalizes the pressure in the case when traveling by air.
UPC: 655457471134

In the Box

  • Foama Studio Case for ARRI ALEXA 35 Lightweight Setup (Black Insert)
  • Nanuk 960 Hard Rolling Case without Foam (Black)
  • EVA Foam Insert
  • Limited Lifetime Warranty

    Foama 440BK0960BK Specs

    Case Type Hard Case
    Interior Dimensions (L x W x H) 22.00 x 17.00 x 12.9" / 55.9 x 43.2 x 32.8 cm (Overall)
    Type of Closure Latch
    Carrying/Transport Options Built-In Wheels, Handle, Recessed Handle
    Material of Construction Resin
    Pressure/Purge Valve Yes
    Exterior Dimensions (L x W x H) 25.39 x 20.00 x 14.49" / 64.49 x 50.8 x 36.80 cm
    Weight 11.7 lb / 5.3 kg

    All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.
    Select size *

    Product details

    Foama 440BK0960BK Overview

    Whether you are an owner-operator who needs a case for your ARRI ALEXA 35 Camera or a rental house looking to protect its investment, this black Studio Case for ARRI ALEXA 35 Lightweight Setup with a black insert from Foama has you covered. Nestled inside a Nanuk 960 case, the durable EVA foam is custom-cut to accommodate your camera and specific accessories.

    The foam insert is custom-made to fit each piece of equipment perfectly, so you can rest assured knowing it's safe from any damage. While most foam inserts on the market are made from open-cell PE or PU foams that are less protective and not as durable, the Foama insert is designed using the highest quality closed-cell EVA foam, which is much stronger and more long-lasting than any other type on the market.

    Insert Accommodates
    • ARRI ALEXA 35 lightweight cage
    • ARRI Bridge Plate Adapter BPA-6
    • Two 18" rods
    • Two accessory pockets
    • Memory cards
    • Card reader
    Case Details
    Made of high-strength NK-7 polypropylene copolymer resin, the case is vibration and impact resistant. It has low-profile wheels and a two-stage telescoping handle so you can pull the case behind you. If you need more freedom of movement, there are three comfortable soft-grip handles on three sides for hand-carrying. Additional design features include gasket sealing that brings the case to an IP67-rating to be dust and waterproof, a molded-in hinge for added strength, stainless 0.34" diameter steel reinforced padlock holes, and four PowerClaw trigger release latches that compress the O-ring and seal the case tight. A built-in automatic pressure release valve equalizes the pressure in the case when traveling by air.
    UPC: 655457471134

    In the Box

    • Foama Studio Case for ARRI ALEXA 35 Lightweight Setup (Black Insert)
    • Nanuk 960 Hard Rolling Case without Foam (Black)
    • EVA Foam Insert
    • Limited Lifetime Warranty

      Foama 440BK0960BK Specs

      Case Type Hard Case
      Interior Dimensions (L x W x H) 22.00 x 17.00 x 12.9" / 55.9 x 43.2 x 32.8 cm (Overall)
      Type of Closure Latch
      Carrying/Transport Options Built-In Wheels, Handle, Recessed Handle
      Material of Construction Resin
      Pressure/Purge Valve Yes
      Exterior Dimensions (L x W x H) 25.39 x 20.00 x 14.49" / 64.49 x 50.8 x 36.80 cm
      Weight 11.7 lb / 5.3 kg

      All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.

      You might like these